Renault Clio: Centre floor front carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and
mechanisms, Complete front seat: Removal -
Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body
internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Pull away the rear carpet.

- Pull away the front carpet.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the front and rear carpets.
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and
mechanisms, Complete front seat: Removal -
Refitting, 75A-33).
Centre floor rear carpet: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove:
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and
mechanisms, Complete front seat: Removal -
Refitting, 75A-33),
- the centre console (see Centre console: Removal - Refitting),
- the front door sill trims (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting, 71A-10).
B85
- Unclip the rear door sill trims (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting, 71A-12).
C85
- Remove the rear wing panel lining (see 71A, Body
internal trim, Rear panel lining: Removal - Refitting, 71A-32).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Pull away the rear carpet.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
II - FINAL OPERATION
C85
- Refit the rear wing panel lining (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear door sill trims (see 71A, Body internal
trim, Rear door sill lining: Removal - Refitting, 71A-12).
- Refit:
- the front door sill trims (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting, 71A-10).
- the centre console (see Centre console: Removal - Refitting),
- the complete rear bench seat,
- the front seats (see 75A, Front seat frames and
mechanisms, Complete front seat: Removal -
Refitting, 75A-33).
Floor carpet: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove:
- the rear centre floor carpet (see 71A, Body internal
trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal
trim, Centre floor front carpet: Removal -
Refitting, 71A-1),
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit:
- the rear centre floor carpet (see 71A, Body internal
trim, Centre floor rear carpet: Removal - Refitting, 71A-3),
- the front centre floor carpet (see 71A, Body internal
trim, Centre floor front carpet: Removal -
Refitting, 71A-1),
READ NEXT:
IMPORTANT
Consult the safety and cleanliness advice and operation
recommendations before carrying out any
repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags and pretensio
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
C
B85 or C85
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags an
SEE MORE:
DP0
Do not drain or remove the automatic gearbox in order
to remove the flow control solenoid valve
REMOVAL
I - REMOVAL PREPARATION OPERATION
Place the vehicle on a two-post lift (see 02A, Lifting
equipment, Vehicle: Towing and lifting).
Disconnect the battery (see 80A, Battery, Battery:
Remov
Topping up/filling
The vehicle must be parked on level
ground and the engine should be cold
(for instance, before the engine is started
up for the first time in the day).
Before performing any
action in the engine compartment,
the ignition must
be switched off by pressing
© 2016-2025 Copyright Renault Clio Owners Club
