Renault Clio: Air conditioning: Check

AIR CONDITIONING or CLIMATE CONTROL

Equipment required

Dual-sensor temperature measuring device

Note: When performing RENAULT maintenance, check the air conditioning system at the end of the vehicle's maintenance program so that the engine will be cold.

I - PREPARATION OPERATION FOR THE MEASUREMENT DEVICE

READ NEXT:

 Refrigerant circuit: Check

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Refrigerant circuit: Draining - Filling

AIR CONDITIONING or CLIMATE CONTROL IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 62A, Air conditioning, Air conditioning: Prec

 Condenser: Removal - Refitting

AIR CONDITIONING or CLIMATE CONTROL Note: Before removal, use DIALOGYS to check how the condenser is fitted and arranged. There are 2 possibilities: the condenser and cooling radiator cannot be se

SEE MORE:

 Drive plate: Removal - Refitting

K4M, and DP0 REMOVAL I - REMOVAL PREPARATION OPERATION Remove the gearbox (see 23A, Automatic gearbox, Automatic gearbox: Removal - Refitting, 23A-7). II - OPERATION FOR REMOVAL OF PART CONCERNED Set up the (Mot. 582-01) (2). Remove: the bolts (2), the drive plate, tool (Mot. 582-01).

 Shock absorber: Removal - Refitting

WARNING To prevent any damage, do not use the rear axle as support for the lifting system. WARNING To prevent any suspension asymmetry, replace both of the shock absorbers on the same axle. WARNING To prevent the components of the rear axle from deteriorating (rubber bushes, brake hoses, etc.) do n

© 2016-2025 Copyright Renault Clio Owners Club