Renault Clio: Rear loading trim: Removal - Refitting
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION

- Remove:
- the rear parcel shelf,
- the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the clips (2).
- Remove the rear end panel central trim assembly.

- Unclip the clips (3).
- Remove the emergency spare wheel flap (4).

- Remove:
- the bolts (5),
- the retaining hooks.


- Remove:
- the bolts (7),
- the centre rear parcel shelf supports.


- Gently lift the luggage compartment tray (9).


- Detach the rear side sections (11) of the luggage
compartment.
- Remove the luggage compartment tray through the
tailgate by bending it slightly (this operation requires
two people).

- Remove the soundproofing.

- Remove the luggage compartment tray mounting (12).

- Remove:
- the bolt (13),
- the load stop bracket.


- Remove the load stop floor by unclipping it towards
the rear (15) (this operation requires two people).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit:
- the load stop floor (this operation requires two people),
- the bolts (14),
- the load stop bracket,
- the bolt (13),
- the luggage compartment tray mounting (12),
- the soundproofing,
- the luggage compartment tray (this operation requires
two people),
- the trim (10),
- the bolts (8).
- Attach the rear side sections (11) of the luggage
compartment tray.
- Refit:
- the centre rear parcel shelf supports,
- the bolts (7) and (6),
- the retaining hooks,
- the bolts (5),
- the emergency spare wheel flap (4).
- Attach the clips (3).
- Refit the rear end panel central trim assembly.
- Attach the clips (2).
II - FINAL OPERATION.
- Refit:
- the centre rear parcel shelf, (1)
- the rear parcel shelf.
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the front speaker (see Front speakers:
Removal - Refitting) (MR 392, 86A, Radio).
Unclip the door mirror trim piece (1).
II - OPERATION FOR REM
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders
Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door
SEE MORE:
JH3 or JR5 or TL4
Bleed in the event of:
dead travel,
pedal at mid-travel,
pedal to the floor,
poor gear changing.
I - PRECAUTIONS DURING REPAIR
Risks relating to contamination.
The hydraulic clutch system is very sensitive to contamination.
The risks caused by contamination are:
impossibl
RIGHT-HAND DRIVE
There is no "RENAULT" tool to check the braking assistance
circuit.
Use a vacuum pump fitted with couplings, part numbers
7701349942 and 7700105874 with hose part
number 8200027352 or 8200376245.
CHECK
I - CHECKING THE SEALS
When checking the brake servo seal, ensure that there
© 2016-2025 Copyright Renault Clio Owners Club
