Renault Clio: Interior rear-view mirror: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip:
- the upper cover,
- the lower cover.
Note:
When removing the rear view mirror, be careful
not to damage the rain sensor nearby.

- Disconnect the connectors.
- Remove the rear view mirror.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the rear view mirror.
- Connect the connectors.
- Clip:
- the lower cover,
- the upper cover.
Sun visor: Removal - Refitting

REMOVAL
I - REMOVAL PREPARATION OPERATION

- Unclip the cover (1) in the slit at (2).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Press on the clip (3) using the tool (Car. 1597) at (4)
to unlock the sun visor.

- Tilt the sun visor at (5).
- Remove the sun visor.

- Unclip the cover of the sun visor central support by pressing the tab
(6).
- Remove the sun visor central support using the
(Car. 1597).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Clip:
- the central sun visor support.
- the cover of the sun visor central support,
- the sun visor.
II - FINAL OPERATION
Grab handle: Removal - Refitting

REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the pins (1) without removing them, using the
(Car. 1597).
- Remove the grab handle or the glasses holder.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the grab handle.
- Clip on the pins (1).
Rear parcel shelf sun visor: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the side trims (1).

- Unclip the rear parcel shelf sun blind (2) and (3).
- Remove the rear parcel shelf sun blind.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Position the rear parcel shelf sun blind.
- Clip the rear parcel shelf blind into place.
- Refit the side trim pieces (1).
II - FINAL OPERATION
- Carry out a function test.
READ NEXT:
IMPORTANT
Before carrying out any work on or near a safety
system component, lock the airbag computer
using the Diagnostic tool. When this function is
activated, all the trigger lines are disabled an
Front seat belt: Removal - Refitting
IMPORTANT
To avoid any risk of triggering when working on or
near a pyrotechnic component (airbags or pretensioners),
lock the airbag computer using the diagnosti
Renault Clio 4 (2014-2019) is equipped with effective sealing and soundproofing measures to ensure a quiet and comfortable cabin environment. The vehicle features well-sealed doors, windows, and body
SEE MORE:
K9K
REMOVAL
I - REMOVAL PREPARATION OPERATION
Disconnect the battery (see Battery: Removal - Refitting)
Remove:
the air inlet duct (1),
the damper valve duct (2).
Remove:
the retaining bracket bolts (3),
the retaining bracket.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Radio location 1
Unclip the blanking cover. The aerial, +
and – supply and speaker wire connections
are located behind it.
Door speakers 2
To install any equipment, please consult
an authorised dealer.
In all cases, it is very important to
follow the manufacturer
© 2016-2025 Copyright Renault Clio Owners Club
