Renault Clio: Rear lighting: List and location of components
I - LIST OF COMPONENTS
The rear lighting is composed of:
- the rear lights on the wing (see 81A, Rear lighting,
Rear wing light: Removal - Refitting, 81A-5)
- rear light bulbs (see 81A, Rear lighting, Rear light
bulb: Removal - Refitting, 81A-7)
- a high-level brake light (see 81A, Rear lighting, 3rd
brake light: Removal - Refitting, 81A-10)
- the rear fog lights (see 81A, Rear lighting, Rear fog
lights: Removal - Refitting, 81A-14)
- the number plate lights (see 81A, Rear lighting,
Number plate light: Removal - Refitting, 81A-
16)
II - LOCATION OF COMPONENTS
B85 or C85 or S85, and DOCUMENTATION
PHASE 1
Rear light on wing

Rear light bulbs

- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
- Rear fog light bulb
High level brake light

Rear fog light

Number plate lights

K85, and DOCUMENTATION PHASE 1
Rear lights on the wing

Rear light bulbs

- Brake light and side light bulb
- Direction indicator bulb
- Reversing light bulb
High level brake light

Rear fog lights

Number plate lights

B85 or C85 or S85, and DOCUMENTATION
PHASE 2
Rear lights on the wing

Rear light bulbs

- Brake light and side light bulb
- Reversing light bulb
- Direction indicator bulb
High level brake light

Rear fog lights

Number plate lights

READ NEXT:
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Open the luggage compartment.
Remove the bolts from the rear wing light (1).
Remove the rear wing light.
Disconnect the connec
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the rear light on the wing (see 81A, Rear
lighting, Rear wing light: Removal - Refitting, 81A-5).
B85 or C85 or S85, and DOCUMENTATION
PHASE 1
U
B85 or C85 or S85
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the blanking covers (1).
Insert a screwdriver in the openings to move the clips (2).
Apply pressure to the clips (2)
SEE MORE:
K9K, and 772
The particle filter must be removed in order to remove
the catalytic converter upstream temperature sensor.
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02, Lifting equipment).
Disconnect the battery (s
D4F, and 740 or 742 or 764
REMOVAL
I - REMOVAL PREPARATION OPERATION
Apply pressure to (1).
Pull at (2).
Remove the air breather sleeve (3) from the front
end panel.
Undo the clip (4) mounting the air filter unit to the
motorised throttle valve.
Disconnect the oil vapour rebreathing hose
© 2016-2025 Copyright Renault Clio Owners Club
