Renault Clio: Rear light bulb: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

B85 or C85 or S85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

K85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

B85 or C85 or S85, and DOCUMENTATION PHASE 2

Renault Clio. Rear light bulb: Removal - Refitting

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

B85 or C85 or S85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Reversing light bulb
  3. Direction indicator bulb
  4. Rear fog light bulb

Note: The layout of bulbs is the same for both rear lights.

K85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Direction indicator bulb
  3. Reversing light bulb

Note: The layout of bulbs is the same for both rear lights.

B85 or C85 or S85, and DOCUMENTATION PHASE 2

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Reversing light bulb
  3. Direction indicator bulb

Note: The layout of bulbs is the same for both rear lights.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Note: When replacing a bulb, only use approved bulbs.

II - FINAL OPERATION

READ NEXT:

 3rd brake light: Removal - Refitting

B85 or C85 or S85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the blanking covers (1). Insert a screwdriver in the openings to move the clips (2). Apply pressure to the clips (2)

 High level brake light bulb: Removal - Refitting

K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the tailgate spoiler (see Tailgate spoiler: Removal - Refitting), the high level brake light (see 81A, Rear lighting, 3rd brake light: Rem

 Rear fog lights: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED K85, and DOCUMENTATION PHASE 1 Move the rear fog light using the tool (Car. 1363) as a lever at (1). B85 or C85 or S85, and DOCUMENTATION PHASE 2

SEE MORE:

 Engine stand: General description

IMPORTANT Use a repair bench to ensure the positioning of the points and the geometry of the axle assemblies. Note: The information contained in the following describes the general repair procedure for all vehicles having the same design for this part. Before reading this general information, check

 Front bumper: Stripping - Rebuilding

EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2 or EQUIPMENT LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5, and DOCUMENTATION PHASE 1 STRIPPING I - STRIPPING PREPARATION OPERATION Remove the front bumper (see 55A, Exterior protection, Front bumper: Removal - Refitting, 55A-1). II - STRIPPI

© 2016-2025 Copyright Renault Clio Owners Club