Renault Clio: Door mirror: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION

II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove:
- the sealing foam (2),
- the bolts (3)
- the door mirror.
- Disconnect the supply connectors (depending on
equipment level).
SCHOOL VEHICLE


- Remove the bolts (5).
- Remove the door mirror.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED

- Connect the supply connector (depending on equipment
level).
- Refit:
- the door mirror,
- the bolts (6),
- the sealing foam.
SCHOOL VEHICLE
- Position the door mirror.
- Refit the door mirror bolts.
- Clip the casing in place.
II - FINAL OPERATION

- Clip the trim piece in place (7).
Door mirror casing: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the door mirror glass (see 56A, Exterior
equipment, Door mirror glass: Removal - Refitting, 56A-16).
II - REMOVAL OPERATION FOR PART
CONCERNED

- Unclip the clips (1).
- Fold in the door mirror.

- Unclip the door mirror casing.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Reclip the door mirror casing in position.
II - FINAL OPERATION
- Refit the door mirror glass (see 56A, Exterior
equipment, Door mirror glass: Removal - Refitting, 56A-16).
SCHOOL VEHICLE
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the door mirror glass (see 56A, Exterior
equipment, Door mirror glass: Removal - Refitting, 56A-16).


- Remove the bolts (2).
- Remove the door mirror.
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip clips (3).
- Fold in the door mirror.

- Unclip the door mirror casing.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Clip on the door mirror casing.
II - FINAL OPERATION

- Offer up the door mirror.
- Refit the bolts (4).
- Clip on the casing
- Refit the door mirror glass (see 56A, Exterior
equipment, Door mirror glass: Removal - Refitting, 56A-16).
Door mirror glass: Removal - Refitting

REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the door mirror glass using the (Car. 1363).
- Disconnect the supply connectors (depending on
the equipment level).
REFITTING
REFITTING PREPARATION OPERATION
- Connect the supply connectors (depending on the
equipment level).
- Clip the door mirror glass in position.
READ NEXT:
Note:
Once removed, the side decorative strips cannot
be refitted and must be replaced each time.
REMOVAL
I - REMOVAL PREPARATION OPERATION
1 - Front side door
Remove:
the front side door trim (se
EQUIPMENT LEVEL EAC or EQUIPMENT LEVEL SPORT
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the bolts (1).
Detach the decorative strip (2).
Note:
Replace the decorative strip (2) ever
SEE MORE:
LEFT-HAND DRIVE, and CLIMATE CONTROL
REMOVAL
I - REMOVAL PREPARATION OPERATION
Lock the airbag computer using the Diagnostic tool
(see Fault finding - Replacement of components) (
MR 394, 88C, Airbag and pretensioners).
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, B
IMPORTANT
When working in the engine compartment, take
care as the radiator fan(s) may start up unexpectedly
(risk of being cut).
To avoid any risk of serious burns when the engine
is hot:
do not open the expansion bottle cap,
do not drain the cooling system,
do not open the bleed screw(s).
N
© 2016-2025 Copyright Renault Clio Owners Club
