Renault Clio: Interior rear-view mirror: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip:
- the upper cover,
- the lower cover.
Note:
When removing the rear view mirror, be careful
not to damage the rain sensor nearby.

- Disconnect the connectors.
- Remove the rear view mirror.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the rear view mirror.
- Connect the connectors.
- Clip:
- the lower cover,
- the upper cover.
Sun visor: Removal - Refitting

REMOVAL
I - REMOVAL PREPARATION OPERATION

- Unclip the cover (1) in the slit at (2).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Press on the clip (3) using the tool (Car. 1597) at (4)
to unlock the sun visor.

- Tilt the sun visor at (5).
- Remove the sun visor.

- Unclip the cover of the sun visor central support by pressing the tab
(6).
- Remove the sun visor central support using the
(Car. 1597).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Clip:
- the central sun visor support.
- the cover of the sun visor central support,
- the sun visor.
II - FINAL OPERATION
Grab handle: Removal - Refitting

REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the pins (1) without removing them, using the
(Car. 1597).
- Remove the grab handle or the glasses holder.
REFITTING
REFITTING OPERATION FOR PART CONCERNED
- Refit the grab handle.
- Clip on the pins (1).
Rear parcel shelf sun visor: Removal - Refitting
REMOVAL
OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the side trims (1).

- Unclip the rear parcel shelf sun blind (2) and (3).
- Remove the rear parcel shelf sun blind.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Position the rear parcel shelf sun blind.
- Clip the rear parcel shelf blind into place.
- Refit the side trim pieces (1).
II - FINAL OPERATION
- Carry out a function test.
READ NEXT:
IMPORTANT
Before carrying out any work on or near a safety
system component, lock the airbag computer
using the Diagnostic tool. When this function is
activated, all the trigger lines are disabled an
Front seat belt: Removal - Refitting
IMPORTANT
To avoid any risk of triggering when working on or
near a pyrotechnic component (airbags or pretensioners),
lock the airbag computer using the diagnosti
Renault Clio 4 (2014-2019) is equipped with effective sealing and soundproofing measures to ensure a quiet and comfortable cabin environment. The vehicle features well-sealed doors, windows, and body
SEE MORE:
Rear axle assembly: Adjustment values
EQUIPMENT LEVEL E3 LEISURE or EQUIPMENT LEVEL EA1 or EQUIPMENT LEVEL EA2
or EQUIPMENT
LEVEL EA3 or EQUIPMENT LEVEL EA4 or EQUIPMENT LEVEL EA5 or EQUIPMENT LEVEL EAG
I - PRELIMINARY OPERATIONS
Before checking the axles on the test bench, check the
tyre press
D4F or K4J or K4M or M4R
IMPORTANT
During this operation, be sure to:
be careful of fuel splashes when disconnecting the
union.
IMPORTANT
Wear goggles with side protectors for this operation.
IMPORTANT
Wear leaktight gloves (Nitrile type) for this operation.
WARNING
To avoid any corrosion or da
© 2016-2025 Copyright Renault Clio Owners Club
