Renault Clio: Rear light bulb: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

B85 or C85 or S85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

K85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

B85 or C85 or S85, and DOCUMENTATION PHASE 2

Renault Clio. Rear light bulb: Removal - Refitting

 

II - OPERATION FOR REMOVAL OF PART CONCERNED

B85 or C85 or S85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Reversing light bulb
  3. Direction indicator bulb
  4. Rear fog light bulb

Note: The layout of bulbs is the same for both rear lights.

K85, and DOCUMENTATION PHASE 1

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Direction indicator bulb
  3. Reversing light bulb

Note: The layout of bulbs is the same for both rear lights.

B85 or C85 or S85, and DOCUMENTATION PHASE 2

Renault Clio. Rear light bulb: Removal - Refitting

  1. Brake light and side light bulb
  2. Reversing light bulb
  3. Direction indicator bulb

Note: The layout of bulbs is the same for both rear lights.

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

Note: When replacing a bulb, only use approved bulbs.

II - FINAL OPERATION

READ NEXT:

 3rd brake light: Removal - Refitting

B85 or C85 or S85 REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED Remove the blanking covers (1). Insert a screwdriver in the openings to move the clips (2). Apply pressure to the clips (2)

 High level brake light bulb: Removal - Refitting

K85 REMOVAL I - REMOVAL PREPARATION OPERATION Remove: the tailgate spoiler (see Tailgate spoiler: Removal - Refitting), the high level brake light (see 81A, Rear lighting, 3rd brake light: Rem

 Rear fog lights: Removal - Refitting

REMOVAL OPERATION FOR REMOVAL OF PART CONCERNED K85, and DOCUMENTATION PHASE 1 Move the rear fog light using the tool (Car. 1363) as a lever at (1). B85 or C85 or S85, and DOCUMENTATION PHASE 2

SEE MORE:

 Manual gear control: Adjustment

TL4 ADJUSTMENT ADJUSTMENT OF SELECTION CABLE DURING A REMOVAL OPERATION 1 - Passenger compartment Shift the selector lever to third gear. Fit a shim (1) (6 mm between the locking ring and reverse gear interlock on the selector lever. Use a strap (2) to immobilise the lever against the shim

 Eco-driving

Fuel consumption is accredited in accordance with a standard regulatory method. Identical for all manufacturers, this enables vehicles to be compared with one another. Consumption in real time depends on vehicle usage conditions, the equipment fitted and the user’s driving style. To optimis

© 2016-2025 Copyright Renault Clio Owners Club