Renault Clio: Front door sill lining: Removal - Refitting
B85 or C85
REMOVAL
I - REMOVAL PREPARATION OPERATION

- Partially remove the seal (1).

- Using a pair of unclipping pliers, unclip the bonnet release catch (2).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Unclip the trim at (3) and (4).
- Remove the trim (5).
C85

- Unclip the trim at (6) and (7).
- Remove the front door sill linings.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the front door sill trim.
II - FINAL OPERATION.
- Refit the bonnet release handle.

Rear door sill lining: Removal - Refitting
B85
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the complete rear bench seat.
- Partially unclip the front door sill trim (see 71A,
Body internal trim, Front door sill lining: Removal
- Refitting, 71A-10).
- Remove the rear door sill upper trim (see 71A, Body
internal trim, Rear inner sill upper trim: Removal
- Refitting, 71A-24).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Remove clip (1) using the unclipping pliers.
- Unclip the trim at (2) and at (3).
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Refit the door sill trim.
- Refit the mounting clip.
II - FINAL OPERATION
- Refit:
- the rear door sill upper trim (see 71A, Body internal
trim, Rear inner sill upper trim: Removal -
Refitting, 71A-24).
- the front door sill trims (see 71A, Body internal
trim, Front door sill lining: Removal - Refitting, 71A-10),
- the complete rear bench seat.
READ NEXT:
B85 or C85
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see Airbag and pretensioners: Precautions
for the repair) (88C, Airbags an
REMOVAL
I - REMOVAL PREPARATION OPERATION
Partially remove the seal (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Unclip the top of the pillar trim at (2).
remove the pillar trim by pul
C85
REMOVAL
REMOVAL PREPARATION OPERATION
Remove:
the complete rear bench seat,
the rear wing panel lining (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
SEE MORE:
K9K, and 772
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02, Lifting equipment).
Disconnect the battery (see Battery: Removal - Refitting)
(MR 392, 80A, Battery).
Remove the engine undertray.
II - OPERATION FOR
D4F or K4J or K4M or K9K or M4R
REMOVAL
I - REMOVAL PREPARATION OPERATION
Position the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 392, 02A, Lifting equipment).
Cut the exhaust pipe (see 19B, Exhaust, Exhaust:
Precautions for the repair, 19B-19) (see )
(MR 392, 19A, Exhau
© 2016-2025 Copyright Renault Clio Owners Club
