Renault Clio: F4R, and Left-hand Drive

Renault Clio. Brake servo

REMOVAL

I - REMOVAL PREPARATION OPERATION

Renault Clio. Brake servo

Renault Clio. Brake servo

Renault Clio. Brake servo

Renault Clio. Brake servo

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Brake servo

Renault Clio. Brake servo

REFITTING

I - REFITTING PREPARATIONS OPERATION

Renault Clio. Brake servo

Renault Clio. Brake servo

II - REFITTING OPERATION FOR PART CONCERNED

III - FINAL OPERATION.

IMPORTANT

Check that the brake servo pushrod-brake pedal connecting shaft is locked in place.

READ NEXT:

 M4R, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal

 F4R, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Removal

 D4F, and 784, and Right-hand Drive

REMOVAL I - REMOVAL PREPARATION OPERATION Remove the dashboard side face (1). Remove: the protective strips from the lower cover (2), the bolts (3), the lower cover (4), disconnecting th

SEE MORE:

 Rear drum bearing: Removal - Refitting

Using a dial gauge connected to the drum, check that the end float is greater than 0.03 mm. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting). Remove: the rear wheels (see 35A, Wheels and tyres, Wheel: Removal - Refitting, 35

 Headlining wiring: Removal - Refitting

REMOVAL I - REMOVAL PREPARATION OPERATION Depending on the equipment level of the vehicle, remove the covers for the interior rear-view mirror in order to disconnect the rain sensor connector (see 85A, Wiping - Washing, Rain and light sensor: Removal - Refitting, 85A-5). Remove the headlining

© 2016-2025 Copyright Renault Clio Owners Club