Renault Clio: Opening Element Sealing
Door sealing film: Removal - Refitting
REMOVAL
Note: The sealing film can only be used once; it is destroyed when it is removed.
It is essential to replace the film with a new one each time it is removed.
REMOVING THE SEALING FILM
- Remove the door trim( (see Front side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim) or( (see Rear side door trim: Removal - Refitting) (MR 393, 72A, Side opening elements trim).
- Unclip the interior handle mounting (if the vehicle is fitted with one) using an unclipping tool.
1 - First procedure
- Strip off the sealing film using a hot air gun set to approximately
100
READ NEXT:
Window Sealing
Front side door glass run channel: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the door trim( (see Front side door trim: Removal
- Refitting) (MR 393, 72A, Side opening
Soundproofing
Bonnet soundproofing: Removal - Refitting
REMOVAL
REMOVAL OPERATION FOR PART CONCERNED
Remove clips (1) using a pair of unclipping pliers.
Remove the bonnet soundproofing.
REFITTING
REFITTING OPE
Trim And Upholstery
Clio IV (2014-2019) offers a range of trim levels and upholstery options to suit individual preferences and style. The trim levels may vary, offering different levels of features and equipment. The up
SEE MORE:
Oil vapour rebreathing circuit: Descriptions
K4J or K4M, and 780 or 800 or 801
Oil vapour rebreathing duct
Calibrated port
Oil vapour recovery plate
located on the rocker cover
Oil vapour rebreathing hole
Oil vapour rebreathing circuit: Operating diagram
K4J, and 780 - K4M, and 800 or 801
A: under low loads, the oil vapours are rebr
Braking circuit: Bleed
IMPORTANT
To avoid all risk of damage to the systems, apply
the safety and cleanliness instructions and operation
recommendations before carrying out any
repair (see 30A, General information, Brake circuit:
Precautions for the repair, 30A-2).
This procedure must be applied after one of the followin
© 2016-2025 Copyright Renault Clio Owners Club
