Renault Clio: Parking brake cables: Removal - Refitting

REMOVAL

I - REMOVAL PREPARATION OPERATION

DRUM BRAKE

II - OPERATION FOR REMOVAL OF PART CONCERNED

Renault Clio. Parking brake cables: Removal - Refitting

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

Renault Clio. Parking brake cables: Removal - Refitting

REFITTING

I - REFITTING OPERATION FOR PART CONCERNED

DRUM BRAKE

Renault Clio. Parking brake cables: Removal - Refitting

DISC BRAKE

 

II - FINAL OPERATION.

DRUM BRAKE

 

READ NEXT:

 Brake servo: Check

RIGHT-HAND DRIVE There is no "RENAULT" tool to check the braking assistance circuit. Use a vacuum pump fitted with couplings, part numbers 7701349942 and 7700105874 with hose part number 8200027352

 Anti-lock Braking System

 Hydraulic unit without ESP: Removal - Refitting

LEFT-HAND DRIVE WARNING Prepare for the flow of fluid, and protect the surrounding components. REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towin

SEE MORE:

 Throttle valve: Cleaning

D4F or F4R or K4J or K4M or M4R IMPORTANT Wear leaktight gloves (Nitrile type) for this operation. IMPORTANT Always wear protective gear (gloves, goggles and breathing masks). Note: Be sure to work in a clean environment so as not to allow any contamination of the throttle valve. CLEANING I - CLEAN

 Mixing motor: Removal - Refitting

LEFT-HAND DRIVE, and CLIMATE CONTROL REMOVAL I - REMOVAL PREPARATION OPERATION Remove the centre console (see Centre console: Removal - Refitting) (MR 393, 57A, Interior equipment). Unclip the trim at (1) and (2) at the base of the dashboard. Partially remove seal (3). Remove the sid

© 2016-2025 Copyright Renault Clio Owners Club