Renault Clio: Front side door trim: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Remove the front speaker (see Front speakers:
Removal - Refitting) (MR 392, 86A, Radio).

- Unclip the door mirror trim piece (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED

- Use a flat-blade screwdriver to undo the trim piece (2).


- Remove trim and bolt.
- Take out interior handle (4) (depending on equipment
level).
- Disconnect the supply connectors.
Note:
For vehicles fitted with manual window winders,
protect the door trim and remove the winder handle
using an unclipping tool.


- Remove the bolts (6).
- Unclip:
- trim using a pair of unclipping pliers (protect the
door box section),
- the interior door handle cable using a flat-blade
screwdriver.
- Disconnect the supply connectors.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
- Reconnect the supply connectors.
- Reclip:
- the interior door handle cable,
- the door trim.




- Reconnect the supply connector.
- Reclip the trim piece (10).
II - FINAL OPERATION
- Refit the front speaker (see Front speakers: Removal
- Refitting) (MR 392, 86A, Radio).

- Reclip:
- the door mirror trim piece (11),
- window winder handle (if fitted in vehicle).
- Carry out a function test.
READ NEXT:
B85 or K85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Special features of vehicles fitted with manual
window winders
Unclip the winder handle (1) using a pair of unclipping
pliers (protect the door
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before beginning work on any component of the
safety system, it is essential to lock the airbag computer
using the Diagnostic tool (see Airbag
SEE MORE:
D4F, and 740 or 742 or 764
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the air filter unit (see 12A, Fuel mixture,
Air filter unit: Removal - Refitting, 12A-17).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Remove:
the mounting bolts (1) from the air filter unit cover,
the air filter
LEFT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
K4J or K4M or K9K
Remove the engine cover.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Disconnect the non-return valve (1) at the servo.
Pull and turn the non-return valve to release it from
the rubber sealing washer.
K9K
Disconn
© 2016-2025 Copyright Renault Clio Owners Club
