Renault Clio: Rear parcel shelf side trim: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
C85
- Remove the rear wing panel trim (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Unclip the rear inner sill upper trim (see 71A, Body
internal trim, Rear inner sill upper trim: Removal
- Refitting, 71A-24).
B85 or C85
- Remove the rear quarter panel trim (see 71A, Body
internal trim, Quarter panel trim: Removal - Refitting, 71A-27).
K85
- Partially remove the seals from the rear side door
and the tailgate.
- Unclip the rear inner sill upper trim at (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
B85 or C85
- Using a flat-blade screwdriver, unclip (2) the rear
parcel shelf side trim.
K85
- Unclip the rear parcel shelf side trim.
- Disconnect the luggage compartment light connector.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
B85 or C85
- Clip the rear parcel shelf side trim onto the rear quarter
panel trim.
K85
- Clip on the rear parcel shelf side trim.
- Refit the bolt (3).
II - FINAL OPERATION.
B85 or C85
- Refit the rear quarter panel trim (see 71A, Body internal
trim, Quarter panel trim: Removal - Refitting, 71A-27).
C85
- Clip on the rear wing panel trim (see 71A, Body internal
trim, Rear panel lining: Removal - Refitting, 71A-32).
B85
- Refit the rear inner sill upper trim (see 71A, Body internal
trim, Rear inner sill upper trim: Removal -
Refitting, 71A-24).
K85
- Connect the luggage compartment light connector.
- Clip on the rear inner sill upper trim.
- Refit the seals on the rear side door and the tailgate.
READ NEXT:
REMOVAL
I - REMOVAL PREPARATION OPERATION
B85 or C85 or S85
Remove the luggage compartment carpet.
K85
Remove the luggage compartment raised floor (1).
Remove the luggage compartment carpe
S85
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the rear parcel shelf,
the centre rear parcel shelf (1).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Unclip the clips (2).
Remove
SEE MORE:
I - PARTS AND CONSUMABLES FOR THE REPAIR
1 - Parts always to be replaced:
the exhaust trunking (if fitted)
the seal or sealing ring on the connection between the
catalytic converter or catalytic pre-converter and the
rest of the exhaust system
the exhaust clip(s) (if fitted)
2 - Consumables
USING THE DASHBOARD CROSS MEMBER
REMOVAL TOOL Car. 1765
Use this tool as indicated in the dashboard removal
procedure.
Fit the tool Car. 1765 as far as the stop (10).
Screw the rod (11) onto the body (10) as far as the
stop.
Firmly lock tool body in the same way as a lock nut
against th
© 2016-2024 Copyright Renault Clio Owners Club