Renault Clio: Front seat lower casing: Removal - Refitting
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2
IMPORTANT
Before doing any work on a safety system component,
be sure to lock the airbag computer using the
Diagnostic tool (see Airbag and pretensioners:
Precautions for the repair). When this function is
activated, all the trigger lines are inhibited and the
airbag warning light on the instrument panel is continuously
lit (with the ignition on).
IMPORTANT
Never handle the pyrotechnic systems (pretensioners
or airbags) near to a source of heat or naked
flame - they may be triggered.
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Disconnect the battery (see Battery: Removal - Refitting)
(80A, Battery).
- Remove the front seat (see 75A, Front seat frames
and mechanisms, Complete front seat: Removal
- Refitting, 75A-33).
FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03
or FRONT SEAT TYPE 05
- Remove the front seat height adjustment control
(see 75A, Front seat frames and mechanisms,
Front seat height adjuster control: Removal - Refitting, 75A-19).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
- Remove the bolt (1) from the front seat base exterior
casing.
- Unclip:
- the front section of the seat base exterior casing,
- the rear section of the seat base exterior casing.
FRONT SEAT WITH HEATING
- Disconnect the heated pad switch connector.
- Remove the front seat base exterior casing.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
FRONT SEAT WITH HEATING
- Connect the heated pad switch connector.
- Refit the front seat base casing.
II - FINAL OPERATION
FRONT SEAT TYPE 02 or FRONT SEAT TYPE 03
or FRONT SEAT TYPE 05
- Refit the front seat height adjustment control (see
75A, Front seat frames and mechanisms, Front
seat height adjuster control: Removal - Refitting, 75A-19).
- Refit the front seat (see 75A, Front seat frames
and mechanisms, Complete front seat: Removal
- Refitting, 75A-33).
- Connect the battery (see Battery: Removal - Refitting)
(80A, Battery).
- Unlock the airbag computer using the Diagnostic
tool (see Airbag and pretensioners: Precautions
for the repair) (see 88C, Airbag and Pretensioners).
- Carry out a function test.
SPORT FRONT SEATS
REMOVAL
I - REMOVAL PREPARATION OPERATION
- Disconnect the battery (see ) (80A, Battery).
- Remove the front seat (see 75A, Front seat frames
and mechanisms, Complete front seat: Removal
- Refitting, 75A-33).
- Remove the " foam - cover " assembly from the
front seat base (see 77A, Front seat trim, Front
seat base trim: Removal - Refitting, 77A-1).
Front seat base exterior casing
- Remove the trim of the front seat height adjustment
control.
- Remove:
- the front seat height adjustment control bolts (1),
- the front seat height adjustment control.
II - REMOVAL OPERATION
1 - Front seat base exterior casing
- Remove:
- the bolts,
- the front seat base exterior casing.
2 - Front seat base interior casing
- Remove:
- the bolt,
- the front seat base interior casing.
REFITTING
I - REFITTING PREPARATION OPERATION
- parts always to be replaced: Bolt of front seat
height adjuster control.
II - REFITTING OPERATION
- Proceed in the reverse order to removal.
READ NEXT:
1/3 and 2/3 rear bench seat base trim: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Lift up the rear bench seat base.
Remove the rear bench seat base at (1).
II - OPERATION FO
Heated seat pad: Removal - Refitting
WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 1
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the front seat (see 75A, Front seat frames and
mechanisms, C
SEE MORE:
FOG LIGHTS
I - LOCATION OF CONNECTORS
R 33 connector (front end panel/front bumper connection).
II - ACCESS TO CONNECTORS
IMPORTANT
Consult the safety and cleanliness advice and
operation recommendations before carrying out
any repair (see 88A, Wiring harness, Wiring:
Precautions for the repair,
M4R, and TL4
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove the driveshaft on the side concerned (see
29A, Driveshafts, Front right-hand driveshaft:
Removal - Refitting, 29A-9) or (see 29A,
Driveshafts, Front left-hand driveshaft: Removal
- Refitting, 29A-2).
II - OPERATION FOR REMOVAL OF
© 2016-2024 Copyright Renault Clio Owners Club