Renault Clio: Petrol injection: List and location of components
Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Petrol Injection / Petrol injection: List and location of components
D4F, and 740 or 742 or 764
- Petrol vapour rebreathing solenoid valve
- Air inlet pressure sensor
- Motorised throttle valve
- Injection computer
(5) Fuel injection computer
(6) Motorised throttle valve
(7) Fuel vapour recirculation solenoid valve
(8) Ignition coil
(9) Upstream oxygen sensor
(10) Oil pressure sensor
(11) Downstream oxygen sensor
(12) Air inlet pressure sensor
(13) Coolant temperature sensor
(14) Engine speed and flywheel position
sensor
(15) Air inlet temperature sensor
(16) Pinking sensor
(17) Oil level sensor
K4J or K4M
- Fuel vapour recirculation solenoid valve
- Camshaft dephaser solenoid valve
- Manifold pressure sensor
- Ignition coil
- Camshaft position sensor
- Motorised throttle valve
- Injection computer
- Connection unit
- Coolant temperature sensor
- Pinking sensor
- Air temperature sensor
- Injection rail and injectors
(13) Injection rail
(14) Injectors
(15) Fuel vapour recirculation solenoid
valve
(16) Manifold pressure sensor
(17) Air temperature sensor
(18) Ignition coils
K4M
(19) Pinking sensor
(20) Camshaft dephaser solenoid
valve
(21) Camshaft position sensor
(22) Coolant temperature sensor
(23) Fuel injection computer
(24) Motorised throttle valve
(25) Connection unit
(26) Engine speed and position sensor
(27) Upstream oxygen sensor
(28) Downstream oxygen sensor
(29) Accelerator pedal potentiometer
(30) Fuel vapour absorber
M4R
- Atmospheric pressure sensor
- Fuel vapour rebreathing solenoid valve
- Motorised throttle valve
- Airflow meter
- Injection computer
- Camshaft position sensor
(7) Upstream oxygen sensor
(8) Downstream oxygen sensor
(9) Pinking sensor
(10) Oil pressure sensor
(11) Oil level sensor
(12) Coolant temperature sensor
(13) Engine speed and flywheel position
sensor protector.
(14) Engine speed and flywheel position
sensor
(15) Camshaft dephaser solenoid valve
D4F, and 784 or 786
- Fuel vapour recirculation solenoid valve
- Upstream oxygen sensor
- Petrol injection computer
- Motorised throttle valve
- Ignition coil
- Engine compartment connection unit
- Intake distributor pressure sensor
- Turbocharger
(9) Fuel injection computer
(10) Throttle valve
(11) Fuel vapour recirculation solenoid valve
(12) Ignition coil
(13) Upstream oxygen sensor
(14) Downstream oxygen sensor
(15) Coolant temperature sensor
(16) Crankshaft speed and position
sensor
(17) Oil level sensor
(18) Oil pressure sensor
(19) Turbocharging pressure limiter solenoid valve
(20) Inlet temperature sensor
(21) Inlet pressure sensor
(22) Inlet pressure sensor
K4M, and 862
- Fuel vapour absorber bleed solenoid valve
- Camshaft dephaser solenoid valve
- Air inlet pressure sensor
- Coil
- Throttle valve
- Petrol injection computer
- Protection and switching unit
- Coolant temperature sensor
- Camshaft position sensor
- Pinking sensor
- Oil pressure sensor
- Air temperature sensor
- Injector rail
(1) Fuel vapour absorber bleed solenoid valve
(2) Camshaft dephaser solenoid valve
(3) Air inlet pressure sensor
(4) Coils
(12) Air temperature sensor
(5) Throttle valve
(6) Petrol injection computer
(7) Protection and switching unit
(8) Coolant temperature sensor
(9) Camshaft position sensor
(10) Pinking sensor
(11) Oil pressure sensor
(13) Injector rail
(14) Upstream oxygen sensor
(15) Downstream oxygen sensor
(16) Crankshaft position sensor
READ NEXT:
Oxygen sensors: Removal - Refitting
D4F, and 740
WARNING
Do not use any product designed to improve electrical
contact in the injection computer connectors
and oxygen sensors and on the oxygen sensor
body. Failure to respect this advic
Crankshaft position sensor: Removal - Refitting
D4F, and 740 or 742 or 764
REMOVAL
I - REMOVAL PREPARATION OPERATION
Disconnect the battery (see Battery: Removal - Refitting).
Remove the air filter unit (see 12A, Fuel mixture, Air filter unit:
Petrol injection computer: Removal - Refitting
D4F, and 740 or 742 or 764
WARNING
Do not use any product designed to improve the
electrical contact in the injection computer and oxygen
sensor connectors or on the bodies of the oxygen
sensors. Fai
SEE MORE:
Pre-postheating unit: Removal - Refitting
K9K
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the battery (see Battery: Removal - Refitting),
the battery tray (see Battery tray: Removal - Refitting)
(MR 392, 80A, Battery).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Remove the pre-postheating unit mounting bolt (8).
Fuel temperature sensor: Removal - Refitting
K9K, and 750 or 752 or 766 or 768
IMPORTANT
Use the diagnostic tool before any operation is carried
out on the injection circuit to check:
that the injector rail is not under pressure,
that the fuel temperature is not too high.
It is essential to respect the safety and cleanliness
advice whenev
