Renault Clio: Sealing And Soundproofing
Renault Clio 4 (2014-2019) is equipped with effective sealing and soundproofing measures to ensure a quiet and comfortable cabin environment. The vehicle features well-sealed doors, windows, and body panels that minimize outside noise intrusion, creating a peaceful atmosphere for occupants. The soundproofing materials used in the construction of the Clio IV help reduce road and engine noise, enhancing the overall driving experience. These sealing and soundproofing measures contribute to a quieter ride and allow occupants to enjoy conversations and audio entertainment without disturbances from the outside environment.
READ NEXT:
Door sealing film: Removal - Refitting
REMOVAL
Note:
The sealing film can only be used once; it is destroyed
when it is removed.
It is essential to replace the film with a new one
each time it is rem
Front side door glass run channel: Removal - Refitting
REMOVAL
I - REMOVAL PREPARATION OPERATION
Remove:
the door trim( (see Front side door trim: Removal
- Refitting) (MR 393, 72A, Side opening
Bonnet soundproofing: Removal - Refitting
REMOVAL
REMOVAL OPERATION FOR PART CONCERNED
Remove clips (1) using a pair of unclipping pliers.
Remove the bonnet soundproofing.
REFITTING
REFITTING OPE
SEE MORE:
UCH: Removal - Refitting
RIGHT-HAND DRIVE
REMOVAL
I - REMOVAL PREPARATION OPERATION
If replacing the UCH, carry out the necessary programming
using the Diagnostic tool. (see Fault
finding - Replacement of components) (MR 394,
87B, Passenger compartment connection unit).
Disconnect the battery
REMOVAL
I - REMOVAL PREPARATION OPERATION
Protect the edges of the trim with masking tape.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
Note:
Fixed side trims may be removed in one of two
ways, depending on the bonding method used
(OE trim or replacement trim).
To know which method to use, perfo
© 2016-2025 Copyright Renault Clio Owners Club