Renault Clio manuals

Renault Clio: Diesel Injection

Renault Clio III (2005-2013) Service Manual / Engine And Peripherals / Diesel Injection

READ NEXT:

 Diesel injection: Precautions for the repair

K9K I - RISKS RELATING TO CONTAMINATION The high-pressure direct injection system is highly sensitive to contamination. The risks caused by contamination are: damage to or destruction of the high pr

 Diesel injection: List and location of components

K9K, and 750 or 760 or 762 or 764 or 766 or 768 High pressure pump Flow regulation solenoid valve Pressure regulation solenoid valve Diesel temperature sensor Spacer between the cylinder head

 Diesel injection computer: Configuration

K9K, and 750 or 752 or 764 or 766 or 768 To configure the computer, (see MR 394 Fault finding, Diesel Injection, Configuration and programming). Diesel injection computer: Removal - Refitting K9K

SEE MORE:

 Throttle valve: Removal - Refitting

D4F, and 740 or 742 or 764 REMOVAL I - REMOVAL PREPARATION OPERATION Disconnect the battery (see Battery: Removal - Refitting). Remove the air filter unit (see 12A, Fuel mixture, Air filter unit: Removal - Refitting, 12A-17). Disconnect the motorised throttle valve connector. II - OPERATION F

 Driver's front side door wiring: Removal - Refitting

IMPORTANT Consult the safety and cleanliness advice and operation recommendations before carrying out any repair (see 88A, Wiring harness, Wiring: Precautions for the repair, 88A-5). REMOVAL I - REMOVAL PREPARATION OPERATION Raise the window fully. Switch off the ignition. Disconnect the battery

© 2016-2025 Copyright Renault Clio Owners Club