Renault Clio: Engine And Cylinder Block Assembly

READ NEXT:

 Crankshaft seal on timing end: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Disconnect the battery (see Battery: Remo

 Crankshaft seal, gearbox end: Removal - Refitting

K9K REMOVAL I - REMOVAL PREPARATION OPERATION Position the vehicle on a two-post lift (see Vehicle: Towing and lifting) (MR 392, 02A, Lifting equipment). Remove: the gearbox (see Manual gearbox

 Engine oil: Draining - Refilling

D4F or K4J or K4M or K9K I - RECOMMENDATIONS FOR REPAIR Direction of fitting of the drain plug seal. K4J or K4M or K9K For an aluminium engine oil sump There is no direction of fitting for a s

SEE MORE:

 Front seat lower casing: Removal - Refitting

WITHOUT SPORT SEATS, and DOCUMENTATION PHASE 2 IMPORTANT Before doing any work on a safety system component, be sure to lock the airbag computer using the Diagnostic tool (see Airbag and pretensioners: Precautions for the repair). When this function is activated, all the trigger lines are inhibited

 Cooling system: Draining - Refilling

IMPORTANT The circuits are designed to be pressurised, so be careful at high temperatures (risk of serious burns). Do not remove the cap from the expansion bottle while the engine is hot. Take care when carrying out a repair under the bonnet, as the radiator fan(s) may start to operate without wa

© 2016-2025 Copyright Renault Clio Owners Club